Graphics and AutoCAD | Set 1

1. What is the common angle of projection, for the Isometric view?

A. First Angle

B. Second Angle

C. Third Angle

D. None of above

Correct : C. Third Angle

2. Name the AutoCAD tool bar where you find the hidden Line Types?

A. Draw Toolbar

B. Modify Toolbar

C. Command Line

D. Object Properties Toolbar

Correct : D. Object Properties Toolbar

3. Name the Orthographic projections for the Isometric view “C”

A. Plan

B. Front

C. R.H End Elevation

D. L.H End Elevation

Correct : A. Plan

4. What type of drawing is it?

A. Isometric

B. Orthographic

C. Isobaric

D. None of above

Correct : A. Isometric

5. In which bar do you find the “Snap & Grid” icon?

A. Draw Toolbar

B. Modify Toolbar

C. Status bar

D. Object Properties Toolbar

Correct : C. Status bar

6. AutoCAD draw tool bar symbol is used for :

A. polygon

B. Rectangle

C. Pentagon

D. Construction line

Correct : A. polygon

7. What does this AutoCAD icon represent?

A. Arc

B. Spline

C. Polyline

D. Line

Correct : C. Polyline

8. Identify the following symbol, found in MODIFY TOOL BAR

A. Offset

B. Scale

C. Mirror

D. Cloud

Correct : D. Cloud

9. In Auto-CAD, a circle can be draw by the following commands:

A. Centre-Radius

B. Centre- Diameter

C. Two Points

D. All of above

Correct : D. All of above

10. In Auto-CAD object snap is used to pick accurately--------------of a line.

A. End point

B. Mid point

C. Nearest point

D. All of above

Correct : D. All of above

11. Name the Orthographic projection view “a”?

A. Plan

B. Front

C. R.H End Elevation

D. L.H End Elevation

Correct : A. Plan

12. What type of drawing is it ?

A. Isometric

B. Orthographic

C. Isobaric

D. None of above

Correct : A. Isometric

13. In the adjacent figure, the front width & height view dimensions are:

A. 80, 40

B. 40, 20

C. 80, 20

D. 10, 20

Correct : A. 80, 40

14. In which bar do you find the “Ortho & Osnap” icon?

A. Draw toolbar

B. Modify toolbar

C. Object properties toolbar

D. Status bar

Correct : D. Status bar

15. AutoCAD “draw tool” bar symbol is used for ------------command.

A. Pentagon

B. Rectangle

C. Array

D. Construction line

Correct : C. Array

16. What does this AutoCAD icon represent?

A. Arc

B. Spline

C. Polyline

D. Rotate

Correct : D. Rotate

17. In AutoCAD, an arc can be drawn by the following command:

A. Start, End, Radius

B. Start, End, Direction

C. Three Points

D. All of the above

Correct : D. All of the above

18. In AutoCAD, “Ortho” command is used to draw--------------lines.

A. Perpendicular

B. Inclined

C. Polyline

D. All of above

Correct : A. Perpendicular

19. What does this AutoCAD symbol represent?

A. Inclined

B. Chamfer

C. Fillet

D. Radius

Correct : B. Chamfer

20. In AutoCAD, ------------- command is used to round the corners of a rectangle.

A. Break

B. Chamfer

C. Fillet

D. Extend

Correct : C. Fillet

21. In AutoCAD, the most common used coordinate systems are

A. Relative

B. Polar

C. Direct distance

D. All of above

Correct : D. All of above

22. Orthographic drawing refers to a 2D (two-dimensional) representation of an object in a view that shows only ----------- at a time.

A. One side

B. Two sides

C. Three sides

D. All sides

Correct : A. One side

23. In the third-angle projection; the top view of an isometric drawing is projected on --------plane.

A. Front

B. Side

C. Top

D. All of the above

Correct : C. Top

24. In AutoCAD, a poly line can be drawn by:

25. Name the Orthographic projection view “b” shown in the adjacent figure

A. Plan

B. Front

C. R.H End Elevation

D. L.H End Elevation

Correct : B. Front

26. In which Auto CAD tool bar do you find the “Grid & Snap” icon?

28. The chamfer command is used to cut the corners of a-------------- at 45 degree.

32. An “arc” can be drawn by

33. In the AutoCAD a circle can be drawn by

A. Center, radius

B. Center, diameter

C. 3 points

D. All of the above

Correct : D. All of the above

Quiznetik

Graphics and AutoCAD | Set 1

1. What is the common angle of projection, for the Isometric view?

2. Name the AutoCAD tool bar where you find the hidden Line Types?

3. Name the Orthographic projections for the Isometric view “C”

4. What type of drawing is it?

5. In which bar do you find the “Snap & Grid” icon?

6. AutoCAD draw tool bar symbol is used for :

7. What does this AutoCAD icon represent?

8. Identify the following symbol, found in MODIFY TOOL BAR

9. In Auto-CAD, a circle can be draw by the following commands:

10. In Auto-CAD object snap is used to pick accurately--------------of a line.

11. Name the Orthographic projection view “a”?

12. What type of drawing is it ?

13. In the adjacent figure, the front width & height view dimensions are:

14. In which bar do you find the “Ortho & Osnap” icon?

15. AutoCAD “draw tool” bar symbol is used for ------------command.

16. What does this AutoCAD icon represent?

17. In AutoCAD, an arc can be drawn by the following command:

18. In AutoCAD, “Ortho” command is used to draw--------------lines.

19. What does this AutoCAD symbol represent?

20. In AutoCAD, ------------- command is used to round the corners of a rectangle.

21. In AutoCAD, the most common used coordinate systems are

22. Orthographic drawing refers to a 2D (two-dimensional) representation of an object in a view that shows only ----------- at a time.

23. In the third-angle projection; the top view of an isometric drawing is projected on --------plane.

24. In AutoCAD, a poly line can be drawn by:

25. Name the Orthographic projection view “b” shown in the adjacent figure

26. In which Auto CAD tool bar do you find the “Grid & Snap” icon?

27. AutoCAD “Modify toolbar” symbol is used for ----------command.

28. The chamfer command is used to cut the corners of a-------------- at 45 degree.

29. What is the diameter of circle “B”

30. What is the arc radius of “A”

31. How many hidden circles from front view?

32. An “arc” can be drawn by

33. In the AutoCAD a circle can be drawn by

34. Identify the following symbol, found in “modify tool bar