Quiznetik

Design of Reinforces Concrete Structures | Set 2

1. In a beam the local bond stress Sb, is equal to

Correct : A. Shear force/(Leaver arm × Total perimeter of reinforcement)

2. A continuous beam shall be deemed to be a deep beam if the ratio of effective span to overall depth, is

Correct : A. 2.5

3. If the length of a wall on either side of a lintel opening is at least half of its effective span L, the load W carried by the lintel is equivalent to the weight of brickwork contained in an equilateral triangle, producing a maximum bending moment

Correct : C. WL/6

4. The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called

Correct : A. Balanced section

5. The vertical portion of a step in a stairs case, is known as

Correct : A. Rise

6. For stairs spanning horizontally, the minimum waist provided is

Correct : D. 12 cm

7. The advantage of a concrete pile over a timber pile, is

Correct : D. All the above

8. If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is

Correct : D. 58 d

9. For M20 grade of concrete, the maximum shear stress shall not exceed

Correct : D. 2.2 N/mm2

10. The number of treads in a flight is equal to

Correct : C. Risers minus one

11. The bond strength between steel and concrete is due to

Correct : C. both friction and adhesion

12. In a public building width of stair should be at least

Correct : D. 1800 mm

13. When minimum eccentricity in columns does not exceed 0.05 times the lateral dimension, the axial load carrying capacity is reduced by

Correct : B. 11%

14. The maximum percentage of moment redistribution allowed in RCC beams is

Correct : C. 30%

15. Minimum grade of concrete for moderate exposure with normal weight aggregates is

Correct : C. M 25

16. Minimum grade of concrete for moderate exposure with normal weight aggregates is

Correct : C. M 25

17. The minimum reinforcement using mild steel in slab should not be less than

Correct : C. 0.15%

18. The stress strain curve for concrete is considered parabolic by I.S. code upto a strain of

Correct : D. 0.0035

19. For a simply supported beam of span 15 m, the minimum effective depth to satisfy the vertical deflection limits should be

Correct : D. more than 1 m

20. Limit state method is based on probable

Correct : C. Both A and B

21. The ratio of permissible shear stress in limit state method oof design and working stress method of design is

Correct : A. 25 : 16

22. If no compression steel is used, two suspended bars of minimum ______ diameter should be used to support shear reinforcement

Correct : B. 10 mm

23. The load carrying capacity of helically reinforced column as compared to

Correct : C. 5% more

24. What is the minimum number of longitudinal bars provided in a reinforced concrete column of circular circular cross-section ?

Correct : C. 6

25. For water retaining structures, minimum grade of concrete to be used is

Correct : C. M 25

26. A strap footing is a special type of

Correct : C. Combined footing

27. In R.C. footing on soil, the thickness at the edge should not be less than

Correct : B. 15 cm

28. What should be the minimum grade of reinforced concrete in and around sea coast construction ?

Correct : B. M 30

29. Which is the most important IS code for a Civil Engineer?

Correct : B. IS 456

30. The diameter of the column head support a flat slab, is generally kept

Correct : A. 0.25 times the span length

31. Various types of steel used in RCC

Correct : C. Fe 500