1. Which of these is not a part of product planning?
Correct : D. finalizing process
2. How does marketers study customers and products for the generation of ideas?
Correct : D. all of the mentioned
3. Which of these does not account for Passive channels fo opportunity funnels?
Correct : C. monitoring trends
4. Which of these is false about the opportunity statement?
Correct : A. opportunity statement collects product ideas into opportunity funnel
5. Decisions through which an organization follows development?
Correct : A. competitive strategy
6. What are the factors Profitability depends on?
Correct : D. all of the mentioned
7. The expected qualities of a product are
Correct : D. all of the mentioned
8. The life cycle of a product includes
Correct : D. all of the mentioned
9. Life-cycle engineering is also called
Correct : A. green design
10. Sustainable manufacturing is required for
Correct : D. all of the mentioned
11. The mechanical properties of good product material are
Correct : D. all of the mentioned
12. The physical properties of good product material are
Correct : D. all of the mentioned
13. The chemical properties of good product material are
Correct : D. all of the mentioned
14. Considerations of costing systems are
Correct : D. all of the mentioned
15. Which manufacturing process includes the powder metallurgy?
Correct : B. forming and shaping
16. Which of the following is not included in forming and shaping process?
Correct : D. broaching
17. Expendable mold and permanent mold are the parts of manufacturing process.
Correct : B. casting
18. Casting includes grinding process.
Correct : B. false
19. Brazing is a type of metal joining process.
Correct : A. true
20. Which of the following processes are included in finishing?
Correct : B. polishing and lapping
21. Machining process deals with drawing.
Correct : B. false
22. Which of the following is not the type of finishing process?
Correct : A. diffusion bonding
23. Which of the following is not the type of joining process?
Correct : D. none of the mentioned
24. Which of the following is the type of permanent joining process?
Correct : C. both welding and soldering
25. Which of the following is the type of temporary joining process?
Correct : B. mechanical joining
26. In type of manufacturing process, material is wasted. It is in the form of chips.
Correct : A. machining process
27. Which of the following is included in machining process?
Correct : C. drilling
28. With the use of Jigs and fixture rate of production will
Correct : A. increase
29. Jigs and fixture increases the accuracy of the parts.
Correct : A. true
30. Jigs And fixture are used to provide interchangeability.
Correct : A. true
31. With the use of Jigs and fixture
Correct : A. labour cost decreases
32. Which of the following is not correct about fixture?
Correct : D. it is used to guide the cutting tool
33. Which of the following is not correct about jig?
Correct : D. none of the mentioned
34. In which of the following operation jigs are preferred over fixture?
Correct : A. drilling
35. Number of degree of freedom of a workpiece in space is equal to
Correct : B. 12
36. Land use, transportation and road network plans are
Correct : A. inter linked
37. The first stage in the function of traffic engineering department is?
Correct : B. collection of data
38. Traffic forecast is not influenced by
Correct : D. weather
39. The NHDP are being undertaken by private companies on the basis of
Correct : C. bot
40. The traffic will increase if the
Correct : B. price of vehicles decreases
41. The process of working out the cost per unit of each item is known as
Correct : C. data
42. While fixing rate per unit of an item, the quantity of materials and labour needed for one unit of an item are strictly per
Correct : B. standard data book
43. In the case of works which require some special types of equipment, an amount of
Correct : A. 1-2
44. Which of the following is not a method used for preparing approximate estimates?
Correct : D. cylindrical base method
45. In the plinth area method, the cost of construction is computed by the multiplication of
Correct : C. plinth area and plinth area rate
46. As per IS 3861-1966, which of the following areas should not be included while calculating the plinth area of a building?
Correct : D. area of lofts
47. For the preparation of approximate estimates, cubical contents method is more accurate than the unit base method and plinth area method.
Correct : A. true
48. In the cubical contents method, the cost of a structure is computed by the multiplication of total cubic contents and
Correct : C. local cubic rate
49. Estimating is the technique of calculating the various quantities and is needed for controlling the expenditure during the
Correct : B. standard data book
50. is required for preliminary studies of various aspects of a work or project.
Correct : D. abstract estimate
51. Approximate cost of a hostel building for 100 students @Rs.10000/- per student works out as Rs. 10 lakhs.
Correct : A. true
52. Approximate cost of sewerage project for a population of one [email protected] Rs. 10/- head works out as Rs. 10 lakh.
Correct : B. false
53. Cube rate estimate is less accurate as compared to the plinth area estimate as the height of the building is also compared.
Correct : B. true
54. For storeyed building plinth area estimate is not prepared for each storey separately.
Correct : B. false
55. is prepared on the basis of plinth area of building, the rate being deducted from the cost of similar building having similar specification, heights and construction, in the locality.
Correct : D. plinth area estimate
56. In this method approx. total length of walls is found in running metre and this total length multiplied by the rate per running metre of wall gives a fairly accurate cost.
Correct : C. approximate quantity method estimate
57. estimate is a detailed estimate and is prepared to maintain the structure or work in proper order and safe condition.
Correct : B. maintenance estimate
58. The term is used to denote a procedure of costing or valuing an item of work on the basis of actual labourers and materials required.
Correct : C. day-work
59. Which of the following is a type of forging?
Correct : D. hold dies
60. In which of the following forging metal is kept in the lower die?
Correct : A. open die
61. In which of the forging process metal is kept in between a pair of dies and a gutter is provided in the lower die?
Correct : B. closed die
62. The extra metal which settles down in the gutter is known as?
Correct : A. flash
63. In which of the following forging process no flash is formed?
Correct : B. closed die
64. Cogging, which is also called as drawing out, is basically?
Correct : A. open die forging operation
65. In rolling operation, the roll rotates with surface velocity?
Correct : C. equal to speed of the incoming metal
66. A round billet made of 70-30 brass is extruded at a temperature of 675°C. The billet diameter is 125 mm, and the diameter of the extrusion is 50 mm. Calculate the extrusion force required.
Correct : C. 5.6 mn
67. In which type of extrusion, a billet is placed in a chamber?
Correct : A. forward
68. In which type of extrusion, the die moves toward the unextruded billet?
Correct : B. indirect
69. In which type of extrusion, the billet is smaller in diameter than the chamber?
Correct : C. hydrostatic
70. Scope of automation in foundry process is
Correct : A. low
71. Which of the following is an advantage of the Green sand molding process used in a foundry?
Correct : D. all of the mentioned
72. The energy consumption is a drawback of the foundry.
Correct : A. high
73. Majority parts in transportation vehicles are made by the foundry processes.
Correct : A. true
74. defects in castings cannot be identified easily.
Correct : A. internal
75. The directional properties are imparted to the castings made in foundries.
Correct : A. single
76. In the foundry, the metal joining process is employed.
Correct : B. false
77. Foundry process is used to make intricate parts.
Correct : A. true
78. is the speed at which the metal is removed by the tool from the work piece.
Correct : B. cutting speed
79. Which of the following represents the formula for cutting speed? cs =cutting speed, D= diameter of work, N= rpm.
Correct : A. cs = (3.14*d*n)
80. is the distance the tool advances for each revolution of the work.
Correct : A. feed
81. Which of the following is the unit of the feed?
Correct : B. mm / revolution
82. The depth of cut is the distance measured from the machined surface to the surface of the work piece, which is uncut.
Correct : B. perpendicular
83. Which of the following represents the unit of metal removal rate?
Correct : C. mm*mm*mm/revolution
84. Which of the following represents the unit for machining time?
Correct : C. minute
85. For general purposes, ratio of the depth of cut to the feed varies from
Correct : A. 10:1
86. Which of the following is used to drive the work piece?
Correct : C. both carriers and catch plates
87. Drilling is performed by holding the work by a chuck.
Correct : A. true
88. Knurling can be performed by special attachments.
Correct : B. false
89. Grinding can be performed by
Correct : C. special attachments
90. Taper boring and the under boring can be performed by
Correct : B. face plates or angle plates
91. Milling can be performed by
Correct : D. special attachments
92. Spinning can be done by
Correct : A. centres
93. Eccentric turning can be performed by using special attachments.
Correct : B. false
94. Shaping can be performed more effectively by milling machine.
Correct : B. vertical
95. Form cutting can be performed more effectively by milling machine.
Correct : A. horizontal
96. Slab milling can be performed more effectively by milling machine.
Correct : A. horizontal
97. Drilling can be performed more effectively by milling machine.
Correct : B. vertical
98. Boring can be performed more effectively by milling machine.
Correct : B. vertical
99. Dovetailing can be performed more effectively by milling machine.
Correct : B. vertical
100. Angular milling can be performed more effectively by milling machine.