Quiznetik
E-Supply Chains and Logistics core | Set 2
1. A common requirement in the level of an advanced electronic signature
A. Signatory can be uniquely identified and linked to the signature
B. Signatory must have sole control of private key used to create the electronic signature
C. Signature must be capable of identifying if its accompanying data has been tampered with after the message was signed
D. All of above are true
Correct : D. All of above are true
2. An electronic Signature shall be considered as reliable if it fulfills following requirement,
A. The technique should be such that it can be linked to the creator of the message.
B. The technique of electronic signature must be under the control of the maker of the signature.
C. Any change or alteration to the electronic signature after affixation must be detectable.
D. All of above are true
Correct : D. All of above are true
3. Wireless technology
A. Communicate between two or more entities over distances without the use of wires or cables
B. They use using radio frequency (RF) as well as Infrared (IR) waves”
C. Can be used for short such as few meters to long range communications.
D. All of above are true
Correct : D. All of above are true
4. Major Attributes of Wireless Technology include
A. Fixed wireless
B. Mobile wireless/ Portable wireless
C. IR wireless
D. All of the above
Correct : D. All of the above
5. Radio Frequency identification (RFID)
A. uses electromagnetic fields to automatically identify and track tags attached to objects
B. An RFID tag consists of a tiny radio transponder; a radio receiver and transmitter.
C. When triggered by nearby RFID reader device, the tag transmits digital data
D. All of above are true
Correct : D. All of above are true
6. RFID tags does not include
A. Passive tags are powered by energy from the RFID reader's interrogating radio waves.
B. Active tags are powered by a battery and thus can be read at a greater range from the RFID reader; up to hundreds of meters.
C. Unlike a barcode, the tag doesn't need to be within the line of sight of the reader, so it may be embedded in the tracked object.
D. All of above are true
Correct : D. All of above are true
7. e-procurement can be done by all except
A. B2B
B. B2C
C. B2G
D. B2D
Correct : D. B2D
8. e-procurement value chain- consists of
A. e-Informing
B. e-Tendering
C. e-Auctioning
D. All of the above
Correct : D. All of the above
9. Elements of e-procurement include all except
A. Request for information
B. Request for proposal
C. Request for quotation
D. Request for standardisation of all items
Correct : D. Request for standardisation of all items
10. E-procurement advantages include
A. E-procur’ sys’ offer visibility and control
B. efficiency, transparency, equity, fairness and encouragement of local business
C. Reduces competition
D. lowers transaction costs
Correct : C. Reduces competition
11. E-procurement strategy – costs, benefits and risks include except
A. The cost of expenditure on goods/services related directly to the production/service delivery
B. The cost of non-production of goods and services.
C. The cost of operational procurement activities
D. There are no cost benefits
Correct : D. There are no cost benefits
12. E-procurement Risks include except :
A. Missing opportunities to implement strategies that improve procurement management without the need for investment in e-procurement.
B. Corporate buying strategies that offer value for money, do not need electronic tools.
C. Another risk is over-investment in e-procurement tools that do not deliver the expected benefits
D. Does not use any electronic software
Correct : D. Does not use any electronic software
13. Transport and delivery management is EXCEPT
A. used for enterprises seeking efficiency in order to process delivery
B. a good TMS is essential for schedule pick-up and deliveries.
C. Saves time and keeps track of the order execution and gauge potential delays
D. Does not have control on transportation of goods
Correct : D. Does not have control on transportation of goods
14. Transport and delivery management helps in
A. Visibility automatically tender loads, track shipments, and gather and analyze historical performance data
B. Changes can be implemented to increase efficiency and customer satisfaction
C. Reduces cost of transportation and optimizes packaging
D. All of the above
Correct : D. All of the above
15. Packing management includes these except
A. Packaging contains, protects, preserves, transports, informs, and sells. In many countries it is fully integrated into government, business, institutional, industrial, and personal use.
B. Packaging also refers to the process of designing, evaluating, and producing packages.
C. Packaging can be described as a coordinated system of preparing goods for transport, warehousing, logistics, sale, and end use
D. Packages are not physically protected.
Correct : D. Packages are not physically protected.
16. Packaging may be of several different types except .
A. It can be the shipping container used to ship, store, and handle the product or inner packages
B. Some identify a consumer package as one which is directed toward a consumer or household
C. Packaging may be described in relation to the type of product being packaged:
D. Packaging is not required for over-the-counter drug packaging
Correct : D. Packaging is not required for over-the-counter drug packaging
17. In Packaging all are true except
A. Primary packaging is the material that first envelops the product and holds it.
B. Primary package is the largest package
C. Secondary packaging is outside the primary packaging
D. Tertiary packaging is used for bulk handling, warehouse storage and transport shipping
Correct : B. Primary package is the largest package
18. Labels and symbols used on packages use
A. Bar codes, Universal Product Codes, and RFID labels
B. Symbols standardised nationally and internationally
C. Consumables( FCC and TÜV marks), trademarks, proof of purchase
D. All of the above
Correct : D. All of the above
19. Consumer package content labels
A. are subject to regulations of the country
B. state the quantity (weight, volume, count)- reflects actual contents
C. Show quality standards of the country
D. All of the above
Correct : D. All of the above
20. Consumer package content labels
A. are subject to regulations of the country
B. state the quantity (weight, volume, count)- reflects actual contents
C. Show quality standards of the country
D. All of the above
Correct : D. All of the above
21. Shipments of hazardous materials or dangerous goods
A. have special information and symbols (labels, placards, etc.)
B. are defined in the ASTM D5445 "Standard Practice for Pictorial Markings for Handling of Goods" and ISO 780
C. Pictorial marking for handling of goods
D. All of above are true
Correct : D. All of above are true
22. The traditional “three R’s” are except
A. Reduce
B. Reuse
C. Recycle
D. Rotate
Correct : D. Rotate
23. Packaging machinery may be of the following types
A. Accumulating and collating machines
B. Bottle caps equipment, over-capping, lidding, closing, seaming and sealing machines
C. Coding, printing, marking, stamping, and imprinting machines
D. All of the above
Correct : D. All of the above
24. Order management refers to
A. the process of receiving, tallying, and processing orders
B. is an online software can automate the process
C. Helps in keeping sync with your inventory
D. All of the above
Correct : D. All of the above
25. Need for OMS is
A. Streamline Fulfilment Process
B. Reduces Errors
C. Single View For Multiple Channels
D. All of the above
Correct : D. All of the above
26. Inventory management for E-Commerce uses
A. ABC analysis
B. First in first out(FIFO)
C. Regular Inventory auditing:
D. All of the above
Correct : D. All of the above
27. Inventory Stock mgmt. of WH has
A. FULL AUDIT
B. PARTIAL AUDIT:
C. SPOT CHECKING
D. All of the above
Correct : D. All of the above
28. Warehousing involves
A. is an integral part of Logistics and SCM System
B. involves functions of receiving- storage and preservation
C. outbound functions of issue packing and shipping
D. All of the above
Correct : D. All of the above
29. For Warehouse effectiveness the following factors are important except
A. Proper Location
B. Operations to Add Value
C. Proper material handling devices
D. Non effective control
Correct : D. Non effective control
30. e-business logistics and its benefits involves all except
A. e-logistics is the logistical process that governs everything related to the online marketplace.
B. No Geographical Boundaries
C. Non - Flexible Business Hours
D. Has technological impact
Correct : C. Non - Flexible Business Hours
31. Limitations of e-Business follows except
A. Lack of Personal Touch
B. Delivery Time: lag time discourages customers
C. No Security Issues
D. None of the above
Correct : C. No Security Issues
32. E-sales refers to except
A. any sale effected through the electronic media
B. Orders firm receives electronically
C. no human intervention is needed in this process.
D. It is not fast
Correct : D. It is not fast
33. The environmental effects of e-commerce focuses on
A. Energy
B. resources
C. pollution.
D. All of the above
Correct : D. All of the above
34. e-business- studies on three-layer classification
A. Primary effects mainly come from IT infrastructure like terminal equipments, mobile phones, network infrastructures
B. Secondary effects stem from applications, for example, change in warehousing, transportation or packaging
C. Tertiary Effects centrally refer to the consumption patterns and rebound effects- supports paperless, building less and pollution less environment
D. All of the above
Correct : D. All of the above
35. e-CRM or electronic customer relationship management success depends upon
A. the company is already a customer service orientated, or at least strives to be one
B. company has to have good products and/or services
C. and is committed to continuously improving them
D. All of the above
Correct : D. All of the above
36. e-distribution strategies in the e-age does not have
A. concept which refers to electronic buying and selling of goods and services
B. online ordering in conjunction with the physical delivery of the goods
C. the products ordered online and delivered in digital form
D. None of the above
Correct : B. online ordering in conjunction with the physical delivery of the goods
37. Advantages of E-Distribution:
A. Purchase request of the buyer immediately and can be fulfilled at any time
B. Producer has direct customer contact
C. Shortages and longer lead times are eliminated
D. All of the above
Correct : D. All of the above
38. Disadvantages of E-Distribution:
A. Distribution costs are generally passed directly to the customer
B. Social and interpersonal contacts largely eliminated
C. Illegal reproduction and distribution is currently possible
D. All of the above
Correct : D. All of the above
39. e- Payment Methods are except
A. credit / debit cards
B. bank transfers
C. electronic wallets
D. Physical cash payment
Correct : D. Physical cash payment
40. Pros and Cons of Using an E-payment System include
A. Reaching more clients from all over the world, which results in more sales.
B. More fast effective and efficient transactions —speed and simplicity.
C. Convenience. anytime and anywhere.
D. All of the above
Correct : D. All of the above
41. For transaction along the e-SC
A. Payment gateways and payment providers offer highly effective security and anti-fraud tools to make transactions reliable.
B. E-commerce fraud is growing
C. There is lack of anonymity
D. All are true
Correct : D. All are true
42. e-SCM scorecard targets
A. Financial performance and Customer service
B. Internal business process
C. Education and learning/training
D. All of the above
Correct : D. All of the above
43. Controlling in e-SCM is controlling of SCM flows
A. Product flow
B. Information flow
C. Financial flow
D. All are true
Correct : D. All are true