Quiznetik

Construction Quality Control and Monitoring | Set 1

1. Concept of Quality Control depends on

Correct : D. All the above

2. __________denotes the Closeness of a measurement to its true value.

Correct : A. Accuracy

3. __________of a measurement denotes its closeness to another measurement of the same quality.

Correct : B. Precision

4. The process of comparing any dimension with its true value is known as ________

Correct : C. Calibration

5. Which of the following activities are not included in quality assurance?

Correct : B. Ductility

6. Which one of the following is not a guru of TQM?

Correct : C. Newton

7. To achieve desirable product quality, Taguchi recommends which process?

Correct : D. All the above

8. For fineness of cement test weight of cement retained should not be more than______

Correct : B. 10 % OPC & 5%RHC

9. What is the initial setting time & final setting time of cement?

Correct : A. 30 minutes & 600 minutes

10. Which of the following cement does not have field test?

Correct : C. Final setting time of cement is 600 minutes

11. The nominal size of brick shall be ________

Correct : B. 20 x 10 x 10 cm

12. As per I.S size of standard brick should be _______

Correct : A. 19 x 9 x 9 cm

13. First class bricks should not absorb more than ____% water

Correct : B. 20.00%

14. For plastering proportion of mortar cement: sand shall be __________

Correct : B. 1:3 to 1:4

15. For plastering new surfaces, all masonry joints should be raked to a depth of about ____

Correct : C. 12 mm

16. Which of following does not represented quality?

Correct : C. Test results

17. When structure have a good quality it is ___

Correct : D. All of the above

18. Which of the following steps Juran gives for Quality Control.

Correct : D. All of the above

19. In which of the following includes are in civil engineering works for quality control.

Correct : D. All of the above

20. In which of the following factor does not affecting for quality control.

Correct : B. does not Supervision standards

21. Which of the following benefit is not for quality control.

Correct : C. Both of A and B

22. Which of the following activities are given quality assurance.

Correct : D. All of the above

23. Quality characteristics which are related to only conforming or non-conforming products, are called___

Correct : A. Attributes

24. Quality characteristics which are related to only dimensions or physical parameters, are called___

Correct : B. Variables

25. When record show only the number of, called ___

Correct : A. Attributes

26. Sustainable building means that

Correct : C. Both A and B

27. Which of the following elements should be used optimum to make a green building?

Correct : D. All of the above

28. Which of the following is not the purpose of a green building?

Correct : D. None of the above

29. Which of the following is not an economic benefit for a green building?

Correct : D. None of the above

30. Which of the following is not an environment benefit for a green building?

Correct : C. Decrease air quality

31. Which of the following is a disadvantage of green building?

Correct : D. All of the above

32. Which of the following is not a green building component?

Correct : D. None of the above

33. Which of the following benefit is for green building material?

Correct : D. All of the above

34. Which of the following green rating systems are currently working in India?

Correct : C. Both A and B

35. What are the three pillars of TQM?

Correct : D. Understanding , Improvement , Assurance

36. Zaire proposed "building blocks of TQM"?

Correct : A. True

37. Zaire proposed "Building blocks of TQM" in which year ?

Correct : B. 1991

38. Proposed "The house of TQM models” in which year?

Correct : D. 1993

39. Foundation, Pillars & the top three proposed in which TQM model?

Correct : A. Building blocks of TQM

40. Which of the following is not included in the driving force of TQM?

Correct : C. Import

41. Give full form of P.D.C.A cycle

Correct : B. Plan , Do , Check , Act

42. Who's suggested PDCA cycle?

Correct : B. Deming

43. In machine mixing gap between drum & blades shall not be more than ____

Correct : D. 25 mm

44. Batching error means inaccuracy in the quantity of

Correct : D. All the above

45. The Curing periods depends upon

Correct : D. All of the above

46. While compacting the concrete by a mechanical vibrator , the slump should not exceed

Correct : C. 5.0 cm

47. Improper curing results in

Correct : D. All of the above

48. When removal of form work for walls , columns and vertical faces of all structural members

Correct : B. 16 to 24 hours

49. Removal of props under slabs spanning upto 4.5 m

Correct : B. 7 days

50. Which is a good formwork?

Correct : D. All of the above

51. For a family of 10-15 members, _____ diameter stoneware pipe is sufficient.

Correct : C. 10 cm

52. In W.C and bathroom the slope of the floor should be towards _____

Correct : B. Nanhi Trap

53. Variables also known as___

Correct : B. Continuous data

54. Attributes also known as___

Correct : A. Discrete data

55. Full form of SQC is____

Correct : C. Statistical Quality Control

56. Which of the following activities are given in SQC techniques.

Correct : D. All of the above

57. In a group of similar items, any one item is called___

Correct : B. Unit

58. A common source from which all units are obtained is called____

Correct : A. Universe

59. Which of the following benefit is not for SQC.

Correct : B. Not free from sources of variations

60. Which of the following objectives are for statistical quality control.

Correct : D. All of the above

61. Full form of SPC is ____

Correct : C. Statistical Process Control

62. Which of the following objective is not for SPC.

Correct : D. None of the above

63. Why we should refer NBC for.

Correct : D. All of the above

64. How many parts are consists in to NBC?

Correct : A. 10

65. Which of the following IS code use for masonry construction?

Correct : B. IS : 1905 Masonry Construction

66. Which of the following standards was focused on quality of product instead of quality of process?

Correct : D. All of the above

67. What is the full form ISO is?

Correct : A. International Standard Organization

68. When was issued ISO 9000 series by ISO?

Correct : B. March 1987

69. Which of the following standard is considered good for business practices?

Correct : C. Both A and B

70. Which of the following ISO 9000 parts has given general guidelines?

Correct : D. ISO 9000 and ISO 9004

71. Which of the following ISO 9000 parts has applicable to only design control?

Correct : A. ISO 9001

72. How many elements are covered in ISO 9001 quality system?

Correct : C. 20

73. LEED means___

Correct : B. Leadership in Energy and Environmental Design

74. LEED gives rating in form___

Correct : D. All of the above

75. GRIHA means that___

Correct : A. Green Rating for Integrated Habital Assessment

76. When GRIHA was launched in India?

Correct : B. 2008

77. GRIHA has been prepared by ___

Correct : B. TERI

78. When LEED was launched in india?

Correct : A. 2001

79. Full name of TERI is___

Correct : A. The Energy and Resources Institute

80. Full form of IGBC is that___

Correct : C. Indian Green Building Council

81. What rating did the Government of India make mandatory for government buildings in 2010?

Correct : B. GRIHA – 3 Star

82. ADARSH means___

Correct : C. Association for Development and Research of Sustainable Habitas

83. __________of a measurement denotes its closeness to another measurement of the same quality

Correct : B. Precision

84. The capacity of any instrument to take minimum measurement is called its _______

Correct : D. Least count

85. Which one is not sources of errors?

Correct : C. Calculated Errors

86. 12.3056 number has how many significant figures?

Correct : B. 6

87. Area=(h1+h2+h3+....hn ) d calculated by which method?

Correct : A. Mid ordinate rule

88. Area= (h0 +h1 +h2 +h3 +....hn) (n+1) × nd Calculated by which method?

Correct : B. Average ordinate rule

89. Which methods are generally adopted for computation of volumes

Correct : D. All the above

90. The minimum width of the main entrance at residential door shall be _____

Correct : C. 1000 mm

91. The door / window frame should have ______ horn at the upper side.

Correct : C. 15 cm

92. In school, hospitals, offices the wall openings shall be atleast _____ of the floor area.

Correct : C. 20%

93. A brick dropped flat on the hard ground from a height of ____ should not break.

Correct : D. 1.2 m

94. Instrument used for setting out right angles are

Correct : D. All the above

95. Removal of props under beams and arches spanning upto 6 m

Correct : B. 14 days

96. Full form of QCIP

Correct : D. Quality Control Inspection Program

97. Storage of cement bags should be kept______ away from walls.

Correct : B. 30 cm

98. Bricks absorbing more than _____ water should be rejected

Correct : C. 25%

99. Which of the following points has not be covered in ISO 9003 ?

Correct : D. None of the above

100. Which of the following sequences are for the installation of ISO 9000 quality system?

Correct : B. Preparatory-Implementation-Registration and certification