1. Water proofing treatment is one type of

A. Mechanical system

B. Electrical system

C. Building operation system

D. Multiple services

Correct : D. Multiple services

2. Aims of good lighting

A. To promote work and other activities carried out within the building.

B. To promote the safety of the people using the building.

C. To create a pleasing environment and a sense of well-being for the occupants

D. all of above

Correct : D. all of above

3. Principles of lighting

A. Planning the brightness pattern.

B. Recommended values of illumination.

C. Lighting for movement about a building

D. all of above

Correct : D. all of above

4. The value of Illumination in lux of Residential building

A. 100-150-200

B. 200-300

C. 300

D. 100-450

Correct : A. 100-150-200

5. The value of Illumination in lux of Schools

A. 100-150-200

B. 200-300

C. 300

D. 100-450

Correct : B. 200-300

6. The value of Illumination in lux of stairs

A. 100-150-200

B. 200-300

C. 300

D. 100-450

Correct : A. 100-150-200

7. The value of Illumination in lux of Reading room

A. 100-150-200

B. 200-300

C. 300

D. 100-450

Correct : C. 300

8. The value of Illumination in lux of Industrial building

A. 100-150-200

B. 200-300

C. 300

D. 100-450

Correct : D. 100-450

9. The value of Illumination in lux of Airport building

A. 100-150-200

B. 200-300

C. 300

D. 100-450

Correct : C. 300

10. Due to light sources within the field of vision is called_________

A. Direct glare

B. Reflected glare

C. Veiling Glare

D. Glare

Correct : A. Direct glare

11. Due to reflection from light sources or surfaces of excessive brightness is called_________

A. Direct glare

B. Reflected glare

C. Veiling Glare

D. Glare

Correct : B. Reflected glare

12. where the peripheral field is comparatively very bright is called_________

A. Direct glare

B. Reflected glare

C. Veiling Glare

D. Glare

Correct : C. Veiling Glare

13. Excessive contrast or abrupt and large changes in brightness produces the effect of ______

A. Direct glare

B. Reflected glare

C. Veiling Glare

D. Glare

Correct : D. Glare

14. Total quantity of light emitted from a point source of light per second is called____________

A. luminous flux

B. luminous intensity

C. Illuminance

D. Lumen

Correct : A. luminous flux

15. It is the SI unit of luminous is called____________

A. luminous flux

B. luminous intensity

C. Illuminance

D. Lumen

Correct : D. Lumen

16. Amount of luminous flux emitted from a source in any one direction per unit solid angle is called____________

A. luminous flux

B. luminous intensity

C. Illuminance

D. Lumen

Correct : B. luminous intensity

17. the SI unit of luminous intensity is called____________

A. glare

B. visual task

C. candela

D. Lumen

Correct : C. candela

18. The ease and certainty with which an eye can seen an object is called____________

A. glare

B. visual task

C. candela

D. Lumen

Correct : B. visual task

19. The light received by the earth from the sun consists how many parts?

A. 1

B. 2

C. 3

D. 4

Correct : B. 2

20. The relative amount of sky illuminance depends on

A. altitude of the locality

B. The day of the year

C. The time of the day

D. all of the above

Correct : D. all of the above

21. For Indian conditions, how much solar altitude is assumed as the standard for design purposes.

A. 10

B. 12

C. 15

D. 17

Correct : B. 12

22. The recommended design sky illuminance values for cold climate is

A. 6800

B. 8000

C. 9000

D. 10500

Correct : A. 6800

23. The recommended design sky illuminance values for warm humid climate is

A. 6800

B. 8000

C. 9000

D. 10500

Correct : C. 9000

24. The recommended design sky illuminance values for hot dry climate is

A. 6800

B. 8000

C. 9000

D. 10500

Correct : D. 10500

25. The recommended design sky illuminance values for composite climate is

A. 6800

B. 8000

C. 9000

D. 10500

Correct : B. 8000

26. The recommended design sky illuminance values for temperature climate is

A. 6800

B. 8000

C. 9000

D. 10500

Correct : C. 9000

27. The percentage of that part of daylight illumination at a point in the interior on a given plane which is received directly from the sky s called____________

A. internal reflected component

B. sky component

C. external reflected component

D. glare

Correct : B. sky component

28. The ratio (or percentage) of that part of the day light illuminance at a point on a given plane which is received by direct reflection from external surfaces is called____________

A. internal reflected component

B. sky component

C. external reflected component

D. glare

Correct : C. external reflected component

29. The ratio (or percentage) of that part of the daylight illuminance at a point in a given plane which is received by direct reflection or inter-reflection from the internal surfaces is called____________

A. internal reflected component

B. sky component

C. external reflected component

D. glare

Correct : A. internal reflected component

30. In which case artificial lighting is necessary?

A. Where the recommended illumination levels have to be obtained by artificial lighting only.

B. To supplement day lighting when the level of illumination falls below the recommended value.

C. Where visual task may demand a higher level of illumination.

D. all of the above

Correct : D. all of the above

31. Which one is not a type of metal filament lamp?

A. Vacuum type

B. Low pressure type

C. High pressure type

D. b & c

Correct : D. b & c

32. Which is the type of incandescent lamp?

A. Carbon filament lam

B. arch lamp

C. mercury discharge lamp

D. sodium discharge lamp

Correct : A. Carbon filament lam

33. Necessity of ventilation is ____________

A. Removal of carbon dioxide

B. To supply fresh air rich in oxygen

C. To control dust

D. all of the above

Correct : D. all of the above

34. Necessity of ventilation is ____________

A. To suppress odors & smoke

B. To reduce humidity

C. For removal of body heat

D. all of the above

Correct : D. all of the above

35. Requirement of ventilation is ____________

A. Air change

B. humidity

C. quality of air

D. all of the above

Correct : D. all of the above

36. The minimum & maximum rate of air change is 60 per hour.

A. 1, 30

B. 30, 60

C. 1, 60

D. none of these

Correct : C. 1, 60

37. As per IS : 3362-1965 recommends the following air changes in residential buildings for living room is

A. minimum 3

B. maximum 3

C. minimum 6

D. no need

Correct : A. minimum 3

38. As per IS : 3362-1965 recommends the following air changes in residential buildings for bathroom is

A. minimum 3

B. maximum 3

C. minimum 6

D. no need

Correct : C. minimum 6

39. As per IS : 3362-1965 recommends the following air changes in residential buildings for passage is

A. minimum 3

B. maximum 3

C. minimum 6

D. no need

Correct : D. no need

40. As per IS : 3362-1965 recommends the following air changes in residential buildings for kitchen is

A. minimum 3

B. maximum 3

C. minimum 6

D. no need

Correct : A. minimum 3

41. Requirement of air changes per hour in an enclosed area as per NBC 2005 for assembly hall

A. 2-4

B. 4-8

C. 8-12

D. 10-15

Correct : B. 4-8

42. Requirement of air changes per hour in an enclosed area as per NBC 2005 for bed rooms

A. 2-4

B. 4-8

C. 8-12

D. 10-15

Correct : A. 2-4

43. Requirement of air changes per hour in an enclosed area as per NBC 2005 for conference room

A. 2-4

B. 4-8

C. 8-12

D. 10-15

Correct : C. 8-12

44. Requirement of air changes per hour in an enclosed area as per NBC 2005 for cinema

A. 2-4

B. 4-8

C. 8-12

D. 10-15

Correct : D. 10-15

45. Requirement of air changes per hour in an enclosed area as per NBC 2005 for hospital

A. 3-5

B. 6-8

C. 6-10

D. 8-10

Correct : B. 6-8

46. Requirement of air changes per hour in an enclosed area as per NBC 2005 for libraries

A. 3-5

B. 6-8

C. 6-10

D. 8-10

Correct : A. 3-5

47. Requirement of air changes per hour in an enclosed area as per NBC 2005 for factories

A. 3-5

B. 6-8

C. 6-10

D. 8-10

Correct : D. 8-10

Quiznetik

Building Services | Set 2

1. Water proofing treatment is one type of

2. Aims of good lighting

3. Principles of lighting

4. The value of Illumination in lux of Residential building

5. The value of Illumination in lux of Schools

6. The value of Illumination in lux of stairs

7. The value of Illumination in lux of Reading room

8. The value of Illumination in lux of Industrial building

9. The value of Illumination in lux of Airport building

10. Due to light sources within the field of vision is called_________

11. Due to reflection from light sources or surfaces of excessive brightness is called_________

12. where the peripheral field is comparatively very bright is called_________

13. Excessive contrast or abrupt and large changes in brightness produces the effect of ______

14. Total quantity of light emitted from a point source of light per second is called____________

15. It is the SI unit of luminous is called____________

16. Amount of luminous flux emitted from a source in any one direction per unit solid angle is called____________

17. the SI unit of luminous intensity is called____________

18. The ease and certainty with which an eye can seen an object is called____________

19. The light received by the earth from the sun consists how many parts?

20. The relative amount of sky illuminance depends on

21. For Indian conditions, how much solar altitude is assumed as the standard for design purposes.

22. The recommended design sky illuminance values for cold climate is

23. The recommended design sky illuminance values for warm humid climate is

24. The recommended design sky illuminance values for hot dry climate is

25. The recommended design sky illuminance values for composite climate is

26. The recommended design sky illuminance values for temperature climate is

27. The percentage of that part of daylight illumination at a point in the interior on a given plane which is received directly from the sky s called____________

28. The ratio (or percentage) of that part of the day light illuminance at a point on a given plane which is received by direct reflection from external surfaces is called____________

29. The ratio (or percentage) of that part of the daylight illuminance at a point in a given plane which is received by direct reflection or inter-reflection from the internal surfaces is called____________

30. In which case artificial lighting is necessary?

31. Which one is not a type of metal filament lamp?

32. Which is the type of incandescent lamp?

33. Necessity of ventilation is ____________

34. Necessity of ventilation is ____________

35. Requirement of ventilation is ____________

36. The minimum & maximum rate of air change is 60 per hour.

37. As per IS : 3362-1965 recommends the following air changes in residential buildings for living room is

38. As per IS : 3362-1965 recommends the following air changes in residential buildings for bathroom is

39. As per IS : 3362-1965 recommends the following air changes in residential buildings for passage is

40. As per IS : 3362-1965 recommends the following air changes in residential buildings for kitchen is

41. Requirement of air changes per hour in an enclosed area as per NBC 2005 for assembly hall

42. Requirement of air changes per hour in an enclosed area as per NBC 2005 for bed rooms

43. Requirement of air changes per hour in an enclosed area as per NBC 2005 for conference room

44. Requirement of air changes per hour in an enclosed area as per NBC 2005 for cinema

45. Requirement of air changes per hour in an enclosed area as per NBC 2005 for hospital

46. Requirement of air changes per hour in an enclosed area as per NBC 2005 for libraries

47. Requirement of air changes per hour in an enclosed area as per NBC 2005 for factories