Advanced Construction Technology | Set 3

1. The _________ formwork can be reused several time as compared to ordinary Timber formwork.

A. Sunmica

B. Cardboard

C. Plywood

D. Fibre ply

Correct : B. Cardboard

2. In case of formwork for the floor, the ________ supports should be firmly supported at the bottom.

A. Horizontal

B. Vertical

C. Inclined

D. Slanting

Correct : B. Vertical

3. The formwork for ________ consists of stringers, sheets, joist, bearers and vertical post.

A. Walls

B. Columns

C. Beams

D. Stairs

Correct : D. Stairs

4. Which types of vertical loads applies on the caissons?

A. vertical reaction force

B. live load

C. buoyancy

D. all of the above

Correct : D. all of the above

5. What are symptoms of caisson disease?

A. dizziness

B. headache

C. pain in legs

D. all of the above

Correct : D. all of the above

6. Shot drill use………….. for drilling.

A. steel shots

B. steel blade

C. copper balls

D. any one of the above

Correct : A. steel shots

7. Which factors affect the selection of erection equipment?

A. cost of erection

B. hire range

C. size of work

D. all of the above

Correct : D. all of the above

8. Which method not used for the fastening the steel member?

A. anchor bolts

B. washer

C. casting

D. welding

Correct : C. casting

9. Which method not used for the erection of steel bridges?

A. lifting

B. Stagging

C. using barrages

D. ground joining

Correct : D. ground joining

10. Which component used for the erection of plate girder?

A. lattice pole

B. trestle

C. rollers

D. all of the above

Correct : D. all of the above

11. What is maximum diameter of the chimney? (H is height of the chimney)

A. H

B. 0.4 H

C. 0.05 H

D. 2H

Correct : C. 0.05 H

12. What is spacing between two steps of chimney?

A. 300 mm

B. 400 mm

C. 200 mm

D. 100 mm

Correct : A. 300 mm

13. Which material used for the chimney lining?

A. fire bricks

B. guniting

C. mortar

D. all of the above

Correct : D. all of the above

Quiznetik

Advanced Construction Technology | Set 3

1. The _________ formwork can be reused several time as compared to ordinary Timber formwork.

2. In case of formwork for the floor, the ________ supports should be firmly supported at the bottom.

3. The formwork for ________ consists of stringers, sheets, joist, bearers and vertical post.

4. Which types of vertical loads applies on the caissons?

5. What are symptoms of caisson disease?

6. Shot drill use………….. for drilling.

7. Which factors affect the selection of erection equipment?

8. Which method not used for the fastening the steel member?

9. Which method not used for the erection of steel bridges?

10. Which component used for the erection of plate girder?

11. What is maximum diameter of the chimney? (H is height of the chimney)

12. What is spacing between two steps of chimney?

13. Which material used for the chimney lining?