1. __________ is the process of checking and monitoring the process and products with an intension of preventing non confirming materials from going to the customer
Correct : B. Quality control
2. A planned and systematic pattern of all actions necessary to provide adequate confidence that the product optimally fulfill customers expectation
Correct : A. Quality assurance
3. _________ is a systematic approach to reduction or elimination of waste, work-back flow, rework and losses in production process
Correct : B. Quality improvement
4. _________ is the establishment of the threshold at which level of severity, a defect becomes unacceptable, ie a fault
Correct : A. Quality standard
5. Thick and thin places are found in _________
Correct : A. Yarns
6. _________ is a defect found in yarns
Correct : A. Slubs
7. Hairiness is a defect found in _________
Correct : D. Yarns
8. Dia, GSM, texture etc.. are terms related to _________
Correct : B. Fabric
9. Specs, dye spot and patching are seen in _________
Correct : C. Dyeing
10. Smudging is a term related to _________
Correct : A. Printing
11. _________ is used for determining the weight per square meter of woven fabrics
Correct : B. GSM tester
12. _________ is used for determining the weight per square meter of non wovens
Correct : A. GSM testing machine
13. _________ is used for determining the weight per square meter of knitted fabrics
Correct : A. GSM testing machine
14. _________ tests are generally used for woven fabrics
Correct : B. Tensile strength
15. Tensile strength tests are generally used for _________
Correct : A. Woven fabrics
16. _________ tests are generally used for fabrics where there are definite warp and weft directions in which the strength can be measured
Correct : B. Tensile strength
17. _________ fabrics have a definite warp and weft directions
Correct : A. Wovens
18. _________method is suitable for measuring strength of non-wovens
Correct : A. Bursting strength
19. _________ method is suitable for measuring the strength of lace
Correct : D. Bursting strength
20. Bursting strength test is an alternative method of measuring strength of _________
Correct : A. Knitted fabrics
21. In _________ test the fabric sample is clamped over the rubber diaphragm and pressure in the fluid increased at such a rate that the specimen bursts within 20 ± 3s
Correct : A. Bursting strength test
22. In bursting strength test the fabric sample is clamped over the rubber diaphragm and the _________ in the fluid increased at such a rate that the specimen bursts within 20 ± 3s
Correct : A. Pressure
23. ASTM D2261 test method uses the _________ procedure to measure the tearing strength of fabrics
Correct : A. Single rip
24. ASTM D2261 test method uses the tongue procedure to measure the _________
Correct : B. Tearing strength
25. In tearing strength test method, by cutting a rectangular specimen two _________ are formed
Correct : A. Tongues
26. _________ is a measure of how well a material can withstand the effects of tearing
Correct : B. Tear resistance
27. Tendency of fabric to keep standing without any support
Correct : B. Stiffness
28. _________ is used to determine the color fastness of textiles
Correct : A. Crock meter
29. _________ is the essential nature of something
Correct : C. Quality
30. _________ is an inherent or distinguishing characteristic or property, superiority, excellence or a perceived level of value
Correct : D. Quality
31. _________ is a composite of intrinsic and extrinsic cues to quality
Correct : A. Perceived quality
32. _________ originate from outside the product
Correct : C. Extrinsic quality
33. _________ are not inherent parts of the product
Correct : A. Extrinsic quality
34. _________ contractors supply operators, machines and threads and make garments
Correct : B. CMT
35. Expand QR
Correct : A. Quick response
36. _________ are established for variations in dimensions that occur during garment production
Correct : C. Production tolerances
37. Collar on a dress shirt may have _________ tolerance
Correct : A. Zero
38. _________ may have zero tolerance
Correct : A. Collar on a shirt
39. _________ can cause change in dimension during the production process
Correct : A. Shrinkage
40. If fabric is spread and cut under tension the resulting garment pieces will relax and become _________ than the pattern piece
Correct : A. Smaller
41. Excess heat on fabrics causes _________
Correct : B. Shrinkage
42. _________is the application of computer technology to the development of a garment up to the point of production
Correct : A. CAD
43. Variations that exceed _________ do not meet specifications are called defects
Correct : A. Tolerances
44. Apparel firms frequently use a _________ process called acceptance sampling
Correct : A. SQC
45. Apparel firms frequently use a SQC process called _________
Correct : C. Acceptance sampling
46. _________ reduces the number of defects that appear in finished goods and reduces the dependence of the quality program on 100% inspection of finished goods
Correct : B. In-process inspection
47. _________ in a distribution center provides the opportunity to evaluate consistency of goods produced in a number of different plants, both domestic and foreign
Correct : A. Quality station
48. ASTM is --------------------------
Correct : A. American Standards for Testing and Materials
49. _________ contractors normally cut the garments from patters supplied by the manufacturer and provide sewing operators, machines and thread to make garments
Correct : D. CMT
50. The unprocessed fabric is known as _________
Correct : D. Greige fabric
51. _________ of products depend upon the application of materials, men, machine and manufacturing condition
Correct : C. Quality
52. _________ means data sufficient enough to obtain reliable results
Correct : A. Statistics
53. _________ is the term that can be defined as fitness for the purpose
Correct : D. Quality
54. TPI is a defect found in _________
Correct : A. Yarn
55. Fish eye is a defect found in _________
Correct : A. Fabric
56. _________ is common defect found in dyeing and printing
Correct : B. Shade variation
57. Yellowness is a defect found in _________
Correct : D. Bleaching
58. Patches are defects found in _________
Correct : A. Dyeing
59. Smudging is a common _________ defect
Correct : C. Printing
60. Fastness is a term related to _________
Correct : C. Color
61. Rib is a defect found in _________
Correct : D. Greige fabric
62. Whiteness is a defect found in _________
Correct : A. Bleaching
63. _________ is a defect found in bleaching
Correct : A. Blueness
64. Term cartons is related with _________
Correct : A. Final inspection
65. In process check is otherwise known as _________
Correct : A. Stage inspection
66. In _________ the product is checked at the end of each operation before it goes into the next stage
Correct : C. Process checks
67. The survival in the consumer oriented market depends upon the success of a _________ to make his products to the expected level of standard
Correct : B. Manufacturer
68. _________ is otherwise known as in process checks
Correct : C. Stage inspection
69. In _________ final product is checked to ensure that the product conforms to the specifications stipulated
Correct : A. Inspection of final product
70. In _________ trade the buyer will mention in the L/c or order the mode of inspection to be carried out
Correct : C. International
71. In international trade the buyer will mention in _________ the mode of inspection to be carried out
Correct : C. L/c or order
72. Sleeve to sleeve variation is an example for _________
Correct : D. Major defect
73. Piece with holes in fabric is an example for
Correct : C. Major defect
74. _________is an example for major defect
Correct : A. Measurement more than tolerance
75. Color shade variation in some garment is an example for _________
Correct : D. Major defect
76. Loose threads are examples for _________
Correct : D. Minor defects
77. _________ is an example for minor defect
Correct : C. Small oil stains
78. Skip stitch is an example for _________
Correct : A. Minor defect
79. Black color oil stains and small oil stains above the waist line is an examples for
Correct : D. Major defect
80. _________ is an examples for major defects
Correct : B. Open stitches
81. Needle holes and sewing thread variations are examples for _________
Correct : C. Major defect
82. _________ is an alternative method of measuring strength in which the material is stressed in all directions
Correct : B. Bursting strength
83. _________ test is used to find the strength of parachute fabric
Correct : A. Bursting strength
84. _________ is used for visual assessment of color
Correct : A. Color matching cabinet
85. Expand CWF
Correct : B. Cool White Fluorescent Lamp
86. _________ is a feature of color matching cabinet
Correct : A. Efficient illumination
87. In _________ test method, by cutting the material two tongues are formed
Correct : C. Tear
88. In tear test method a cut is made in a _________ specimen
Correct : A. Rectangular
89. A large variety of tests are used throughout the textile industry to evaluate the performance and _________
Correct : D. Quality
90. In tear test by cutting the material _________ tongues are formed
Correct : A. Two
91. _________ fabrics have very high extension
Correct : A. Knitted
92. GSM testing machines are usually made of high grade _________
Correct : B. Aluminum
93. _________ means in between any process, sewing operation or any activities related to execution of an order
Correct : A. In process
94. _________ is a written or an oral authentication of all the required conformances of an entity
Correct : A. Po sheet
95. First produced samples that will be sent to buyer for verification
Correct : D. Proto sample
96. _________demand a total transformation of an existing management culture
Correct : B. TQM
97. _________ can be said as a quest for excellence, creating the right attitudes and controls to make prevention possible and optimize customer satisfaction by increased efficiency and effectiveness
Correct : D. TQM
98. _________ is always customer oriented
Correct : D. TQM
99. _________ is an approach to improving the effectiveness and flexibility of business as a whole
Correct : C. TQM
100. _________ provides managers and technologists with a regular and up to date feedback regarding the overall effectiveness of their own sphere of operation